SunSeeker QUAD
                   Electronic VHO Lamp Driver

The SunSeeker QUAD Electronic VHO Lamp Driver will power 2, 3 or 4 VHO fluorescent 
bulbs with a combined length of up to 12 feet. It also has a connection for the optional 
Dimmer Control Module, which allows for simulation of sunrise and sunset over the aquarium.

Wiring Diagram




2 Bulb setup:
Connect lamps using 2 Red, 2 Blue and 2 Yellow wires ONLY.
(Do not use either of the double pin connectors.)

3 Bulb setup:
Connect lamps using 2 Red, 2 Blue, 2 Yellow wires PLUS - 2 wires from ONE double pin
connector.
(Use only 1 of the double pin connectors.)

4 Bulb setup:
Connect lamps using 2 Red, 2 Blue, 2 Yellow wires PLUS - 4 wires from TWO double pin
connectors.
(Use 2 of the double pin connectors.)

Installation Tips:

~Only use VHO approved end caps.
~Never mount QUAD inside of aquarium hood or high moisture areas.
~Only use 3-prong grounded plug.
~Plug Unit into GFCI protected outlet.
~Never exceed 12 feet combined lamp length.
~For use with 110 Volt, 60 Hertz.